What is a Well Control Certificate?


 

Well Control Awareness is important to every personnel onboard.📌📌📌

(မြန်မာVersion below)
If you are planning to work on a rig, you might be asked to present your well control certificate.
Having a well control certificate is also one of the important steps to become a driller, derrickman, drilling engineer, or a drilling supervisor.
A well control certificate shows the competency of a personnel in regards of well control procedures such as
-Shut in procedures.
-Circulation.
-Flow check.
-Operation of a BOP.
-Well Killing Method.
-Pressure ratings of the well control equipment & line ups etc.
There are 4 levels in well control certificates.
1) Awareness
2) Introductory
3) Driller
4) Supervisor
In order for you to pass the exam and acquire the certificate, one must be able to score 75% and above.
There are two major organizations which mainly provides the certificates.
-IADC (International Association of Drilling Contractors)
Widely accepted in USA and the gulf of Mexico. However, most of the companies from the Europe, and middle east also accept it.
-IWCF (International Well Control Forum)
Widely accepted in Middle East and Europe.
With that being said, both IADC certificates and IWCF certificates are used interchangeably in many parts of the world.
In terms of price 💲, IADC is a little bit cheaper than IWCF and focused more on theory sides where IWCF is a bit heavy on calculations.
Please drop us your area of interest in Oil & Gas Industry and your topic of interest down below by following this survey link =>>
Myanmar Version
Well Control awareness က rig ပေါ်မှာရှိနေတဲ့သူတွေ အားလုံးအတွက်အရေးပါတဲ့အရာတစ်ခုဖြစ်ပါတယ်။
သင်ဟာ အကယ်၍ rig ပေါ်မှာအလုပ် လုပ်မယ်ဆိုရင်တော့ Well Control လက်မှတ်ကိုပြဖို့လိုပါလိမ့်မယ်။
Well Control လက်မှတ်ဟာ Drilling Engineer, Drilling Supervisor, Driller, Derrick man တွေအတွက် အရေးကြီးပါတယ်။
Well Control လက်မှတ်က သင် well control control procedures တွေနဲ့ပတ်သက်ပြီး သိ တတ်နားလည်မှု၊ အရည်အသွေးကိုပြပါတယ်။ ဥပမာအားဖြင့်
-Shut in procedures
-Circulation
-Flow Check
-BOP operation
-Well Killing Methods
-Pressure ratings of well control equipment & line ups etc.
Well Control လက်မှတ်မှာ အဆင့် ၄ ဆင့်ရှိပါတယ်။
1) Awareness
2) Introductory
3) Driller
4) Supervisor
စာမေးပွဲအောင်ပြီးလက်မှတ်ရဖို့က စာမေးပွဲမှာ ၇၅℅ နဲ့အထက် အောင်မှ လက်မှတ်ရရှိမှာဖြစ်ပါတယ်နော်။
Well Control လက်မှတ်ပေးတဲ့ org က ၂ ခုပဲရှိပါတယ်။
-IADC (International Association of Drilling Contractors)
USA နဲ့ မက္ကဆီကို ပင်လယ်ကွေ့မှာ အသုံးများပါတယ်။
-IWCF (International Well Control Forum)
အာရှ, ဥရောပနဲ့ အရှေ့အလယ်ပိုင်းဒေသမှာအသုံးများပါတယ်။
သို့ပေမယ့် IADC နဲ့ IWCF က နောက်ပိုင်းမှာ ဘယ်ဒေသမှာပဲ ဖြစ်ဖြစ် လက်ခံလာကြပါပြီ။
IADC နဲ့ IWCF မှာ ကုန်ကျစရိတ်အရ IADC က အနည်းငယ်ပိုသက်သာပါတယ်။
စာမေးပွဲအရဆိုရင်တော့ IADC က သီအိုရီပိုင်းပိုများပီးတော့ IWCF က အတွက်အချက်ပိုင်းကို တခါတရံအလေးသာပါတယ်။ ၂ ခုလုံးအတွက် supervisor level မှာ Live session နဲ့ Well Control လုပ်ရတာချင်းတော့ အတူတူပါဘဲ။
ရေနံနှင့်သဘာဝဓာတ်ငွေ့နယ်ပယ်မှာ သင်စိတ်ပါဝင်စားတဲ့အခန်းကဏ္ဍအကြောင်းအရာများ ၊ ခေါင်းစဥ်များကို အောက်ပါလင့်ခ် လေးမှာ ဝင်ရောက်ဖြေဆိုပေးသွားပါဦးနော် =>>

Comments

Post a Comment

Popular posts from this blog

Difference between Semi Tender and Tender Assisted Rigs

Image
  This time we will be talking about tender and semi tender rigs. They are one of the most commonly used rig types in offshore, especially in offshore. Semi tender and tender rigs are usually stationed beside the platform. For example (West Vencedor from Seadrill in Yetagun Campaign, Myanmar) So what are the advantages of semi/tender rigs? 1) Self-raise capability. Can remove its own drilling package and then rig-up on the same package on another platform. 2)Large deck space to store the drilling equipment. 3)Could be fabricated in many yards. 4)Can be utilized as a construction barge depending on the conditions. 5)Can be used where the platform is out of reach from jackup's cantilevers. So what are the disadvantages: 1)Cannot operate in deep water conditions. 2)Cannot withstand rough weather conditions. 3)Weight sensitive. The difference between semi tender and tender rig is the hull design. Since semi tender is a semi submersible, it can operate in deeper water, can withstand to ...
Read more

Should we convert to Renewable Energy?

Image
  Should we convert to Renewable Energy? မြန်မာ version below Over the past years, there has been a lot of efforts to convert our main energy source to renewable energy, instead of fossil fuel and nuclear. A lot of solar farms and huge wind farms have been appearing around the world. Major Oil & Gas companies has been pushing their image towards that as well. So, lets us discuss some of the drawbacks about Renewable Energy. -Getting the free energy from wind and sun is a great idea. Except for the fact that those are very dilute energy sources since they are "Natural". Have you ever come across a photo of solar farm while browsing? -They are huge, like a lot. What most of the people are not seeing is the amount of trees and wildlife needs to be clear from that area is enormous. -If you compare the energy output of a nuclear reactor to a solar farm (Ivanpah, California), you need 450 times 3500 acres to cope up with the energy output of the nuclear reactor. Do you know Ger...
Read more